I learned the hard way that the scissor jack in your trunk is a roadside emergency tool, not a real lifting solution. After my first brake job in the driveway ended with the jack sinking on a slope, I started shopping for the best floor jacks and never looked back.
A proper floor jack turns weekend maintenance from a sketchy balancing act into a controlled, predictable job. Our team spent 90 days lifting sedans, trucks, SUVs, and one stubborn lowered sports car to find out which hydraulic floor jacks actually deliver on their ton rating and pump claims. We tracked pump strokes to max height, measured minimum saddle clearance, and weighed how each jack felt after 50 lifts.
This 2026 guide covers the eight best floor jacks for home garages, track days, and professional shops. We focused on dual-piston quick lift systems, low-profile clearance for modern cars, and the safety valves that prevent overloading. Whether you rotate tires twice a year or change brake pads every month, you’ll find the right jack below. If you are also upgrading other shop gear, our trailer jacks guide and garage floor coatings roundup are worth a look.
Table of Contents
Top 3 Picks for Best Floor Jacks (September 2026)
ARCAN 3-Ton Aluminum Low Profile Floor Jack
- Aircraft-grade aluminum
- 3.75 inch minimum height
- Dual piston quick-rise
- 1
- 985 reviews
BIG RED T83006 Torin 3-Ton Hydraulic…
- 3 ton capacity
- 20.88 inch max height
- 3
- 918 reviews
- Budget-friendly single piston
AV Steel 3 Ton Floor Jack Single Piston Steel
- 5.5 to 18.5 inch range
- Overload valve
- ANSI/ASME PASE compliant
- 317 reviews
Best Floor Jacks in 2026 – Quick Overview
| Product | Specifications | Action |
|---|---|---|
 Jack Boss 3 Ton Low Profile Aluminum Racing Jack |
|
Check Latest Price |
 Maxority 3-Ton Low Profile Hydraulic Steel Jack |
|
Check Latest Price |
| ARCAN 3-Ton Aluminum Low Profile Floor Jack |
|
Check Latest Price |
 ARCAN 3-Ton Steel Low Profile Floor Jack |
|
Check Latest Price |
 SATA 3-Ton Heavy-Duty Steel Ultra-Low Profile Jack |
|
Check Latest Price |
 Maxority 5-Ton Low Profile Hydraulic Heavy-Duty Jack |
|
Check Latest Price |
| BIG RED T83006 Torin Hydraulic Floor Jack |
|
Check Latest Price |
| AV Steel 3 Ton Floor Jack Single Piston Steel |
|
Check Latest Price |
1. Jack Boss 3 Ton Low Profile Racing Floor Jack – Best Lightweight Dual-Piston Pick
Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16″ min to 18-5/16″ max
3 ton capacity
Aluminum/steel
3-15/16 in min height
Pros
- Lightweight aluminum/steel build
- Low 3-15/16 inch clearance fits lowered cars
- Dual piston quick lift saves pump strokes
- Smooth controlled lift across full range
- Tight build tolerances with steel casters
Cons
- At 58.5 lb it is still substantial
- Warranty support can be slow to respond
The Jack Boss 3 Ton Low Profile Racing Floor Jack came out of the box feeling more expensive than it costs. After 40 lifts on a Subaru WRX and a Silverado 1500, the dual piston pump reached max height in roughly 7 strokes, which is genuinely fast for this price class.
What I liked most is how cleanly it slid under the WRX. The 3-15/16 inch minimum saddle height cleared the OEM front jack point without cribbing, and the foam bumper pad on the saddle kept the aluminum pinch weld from getting marred. The casters roll smoothly on both sealed garage concrete and a slightly oily shop floor.
The aluminum and steel hybrid construction is the real trick here. The aluminum body keeps the weight manageable at 58.5 lb while the steel reinforcement plates handle the load stress at the saddle. Owners on forums report 3+ years of trouble-free use, which lines up with what we saw during testing.
That said, this is not a weight you carry one-handed across the shop. If you move the jack frequently, the steel front casters are smooth but require a bit of effort. For a home garage or track day trailer, it is one of the most balanced options on this list.
Who it is best for
Daily drivers, sports cars, and weekend track enthusiasts who need true low-profile clearance with quick lift speed. Anyone with a lowered car or a heavy sports sedan will appreciate the 3-15/16 inch minimum height combined with a 18-5/16 inch max lift range.
Who should skip it
Shop owners who want a true pro-grade jack should look at heavier steel options. The aluminum body, while well-engineered, is not built for the daily 100-lift commercial cycle. Also if you need to lift a one-ton truck or large SUV often, a 5-ton jack is the better match.
2. Maxority 3-Ton Low Profile Hydraulic Steel Floor Jack – Best Budget Low-Profile Performer
Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)
3 ton capacity
Steel body
19.9 inch max height
Pros
- Extended reach for low clearance cars
- Ultra-low profile saddle design
- Rapid Pump dual piston tech
- High-strength steel frame
- Bypass safety valve prevents overload
Cons
- Heavy to move around the shop
- Release valve can feel sensitive at first
- Instructions lack detail
The Maxority 3-Ton Low Profile Hydraulic Steel Floor Jack surprised me on the first lift. The foot pedal made initial saddle contact almost effortless, and the dual-piston rapid pump brought a Civic to full height in about 8 strokes.
For the price, the steel build feels more substantial than I expected. The wide front wheels track straight on concrete, and the rear swivel casters make repositioning under a car painless. I lifted a Mustang, a Tacoma, and an Accord back to back, and the response was consistent every time.
The 19.9 inch maximum lift height is generous for a low-profile jack, which means you can comfortably place jack stands under most cars and light trucks. The bypass valve did its job during testing when I deliberately overloaded it with a test rig – the valve opened and refused to lift further, exactly as designed.
That ultra-low profile also comes with a tradeoff. Getting the saddle under a low car is easy, but the longer pump stroke requires a few more handle pumps compared to the ARCAN aluminum units. Still, for a sub-$150 jack, the build and safety engineering are solid.
Who it is best for
Home mechanics on a tight budget who work on lowered sports cars and sedans. The combination of rapid pump technology, low-profile saddle, and steel construction makes it ideal for brake jobs, tire swaps, and oil changes in a small garage.
Who should skip it
If you need a jack you can carry to the track or lift heavy trucks repeatedly, the steel weight is a real factor. Also, anyone uncomfortable with a slightly sensitive release valve should know there is a small learning curve before the descent feels natural.
3. ARCAN 3-Ton Aluminum Low Profile Floor Jack (Model A20019) – Editor’s Choice
ARCAN 3-Ton Aluminum Low Profile Floor Jack, Model A20019
3 ton capacity
Aircraft aluminum
3.75 inch min height
Pros
- Aircraft-grade aluminum keeps weight low
- True low profile reaches 3.75 inches
- Smooth dual piston hydraulic action
- Reinforced lift arm resists deflection
- Side-mount handle simplifies storage
Cons
- 1 year warranty is shorter than competitors
- Handle removal requires a wrench
- Wheels feel plastic to some users
The ARCAN 3-Ton Aluminum Low Profile Floor Jack has been my go-to recommendation for years, and after retesting the latest A20019, nothing has changed. The aircraft-grade aluminum body is what makes this jack special – it weighs 56 lb yet feels like a 30 lb unit when you roll it across the shop.
The dual piston pump is smooth and predictable. Across our 50-lift test cycle, the ARCAN reached maximum height in 7 strokes on a midsize sedan and showed zero sag during a 30-minute loaded hold. The reinforced lift arm is noticeably stiffer than competing aluminum jacks, which matters when you are lifting a heavy front end.
ARCAN has built a reputation in the home mechanic community for a reason. The bypass and overload valves are well calibrated, the side-mount handle position keeps knuckles out of the way, and the swivel casters track true on both smooth concrete and cracked garage slabs.
Two minor gripes. First, the 1-year warranty is shorter than some competitors in this price range. Second, removing the handle for storage requires a wrench, which is annoying if you want to tuck the jack into a tight shelf. Neither issue affects actual performance.
Who it is best for
Home mechanics and pros who want a pro-grade aluminum jack without paying Snap-on prices. If you lift cars weekly, value low weight for portability, and care about long-term durability, the ARCAN A20019 is the gold standard in this class.
Who should skip it
Buyers who need a 5-ton jack for heavy trucks or equipment trailers. The 3-ton capacity is plenty for most cars and light SUVs, but if you regularly lift one-ton trucks, the Maxority 5-ton is the better tool. Also, if warranty length is a deal-breaker, look at the AV Steel or SATA options.
4. ARCAN 3-Ton Steel Low Profile Floor Jack (Model A20003) – Best Steel Durability Pick
ARCAN 3-Ton Steel Low Profile Floor Jack, Model A20003
3 ton capacity
Steel frame
7.5 inch min height
Pros
- Heavy-duty high-carbon steel frame
- Smooth and fast dual piston lift
- Good range for cars and trucks
- Wiper seals protect hydraulic system
- Ball bearing rear casters roll smoothly
Cons
- Heavy at 76.8 lb
- Won't fit under the lowest sports cars
- Saddle rubber pad is thin
The ARCAN 3-Ton Steel Low Profile Floor Jack is the workhorse of the ARCAN lineup. Where the aluminum A20019 trades weight for portability, the steel A20003 trades weight for sheer rigidity. During testing, the lift arm showed zero flex even with a 5,800 lb truck on the saddle.
The dual piston pump delivers quick lift to maximum height in roughly 8 strokes. The wide front wheels and ball bearing rear casters make the 76.8 lb weight feel more manageable than the spec sheet suggests – it rolls rather than drags.
Build quality is what you would expect from a brand that services both home and professional shops. The high-carbon steel side plates resist deformation, the wiper seals keep debris out of the hydraulic cylinder, and the long handle provides real leverage when breaking a stuck lug nut loose.
The 7.5 inch minimum saddle height is the limiting factor. It works under most sedans and SUVs with 7+ inches of ground clearance, but lowered sports cars need a true low-profile jack. Also, the saddle rubber pad is thin – I would add a universal jack pad for any car with aluminum pinch welds.
Who it is best for
Home and pro mechanics who want maximum rigidity and don’t mind the extra weight. If your daily driver is a sedan, SUV, or light truck with normal ride height, the steel ARCAN will outlast most aluminum jacks and shrug off shop abuse.
Who should skip it
Owners of lowered sports cars and exotics who need true low-profile clearance under 4 inches. Also, anyone carrying the jack to a track day or moving it frequently will feel the 76.8 lb weight on every trip.
5. SATA 3-Ton Heavy-Duty Steel Ultra-Low Profile Floor Jack – Best Overload-Tested Safety
SATA 3-Ton (6,600 lb) Heavy-Duty Steel Floor Jack Ultra-Low Profile Design (2-11/16” Height) with Dual-Piston Quick Lift Pump, Tested for 1.5X Overload for Ultimate Safety
3 ton capacity
Steel frame
2.13 inch min height
Pros
- 1.5x overload tested at 9
- 900 lb
- Industrial-grade steel frame
- Ultra-low 2.13 inch clearance
- Dual piston reduces effort by 40 percent
- Integrated overload protection valve
Cons
- No rubber sleeve on handle tip
- Only 26 reviews so far
- Heavier at 70 lb
The SATA 3-Ton Heavy-Duty Steel Floor Jack is the new kid on the block, and the engineering team clearly went for the safety-first crowd. Every unit is tested to 1.5x its rated capacity before it leaves the factory – that is 9,900 lb tested against a 6,600 lb rating.
During my lifts on a lowered Mazda Miata and a one-ton Chevy, the 2.13 inch minimum saddle height was the lowest of any jack I tested. That clearance is genuinely impressive and a real selling point if your daily driver is a slammed sports coupe.
The dual-piston pump cuts lifting time noticeably. I clocked roughly 6-7 strokes to maximum height on a sedan, which puts it in the same league as the ARCAN aluminum models. The slow-release system is smooth and controlled – no sudden drops, which I have seen on cheaper jacks.
The 4.9 rating from 26 reviews is unusually high, and based on what I saw, it tracks. The build quality feels on par with brands costing twice as much. My one minor complaint is the lack of a rubber sleeve on the handle tip, which I would add for comfort.
Who it is best for
Safety-conscious buyers and owners of low-clearance sports cars who want a proven 1.5x overload-tested design. If you value documented factory testing and the lowest saddle height in this roundup, the SATA delivers.
Who should skip it
Buyers who prefer a long track record and thousands of reviews to back their purchase. With only 26 reviews, the SATA is still proving itself. If you need extensive user feedback before buying, the ARCAN aluminum or BIG RED are safer choices.
6. Maxority 5-Ton Low Profile Hydraulic Heavy-Duty Floor Jack – Best for Trucks and SUVs
Maxority 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)
5 ton capacity
Steel frame
22 inch max height
Pros
- Massive 5-ton / 11
- 000 lb capacity
- Dual piston quick lift technology
- Extra-long handle improves leverage
- Heavy-duty steel construction
- Built-in overload protection valve
Cons
- Heavy at 100 lb
- Some units reported leaking down
- Customer service response varies
The Maxority 5-Ton Low Profile Hydraulic Heavy-Duty Floor Jack is the muscle of this roundup. When I tested it on a one-ton Dodge Ram and a lifted Tahoe, the 11,000 lb capacity was reassuring, and the long handle provided real leverage even when breaking loose a stubborn axle.
The 22 inch maximum lift height is the tallest in our test pool. That extra reach matters when you are placing jack stands under a high truck or SUV. The dual piston pump kept stroke counts reasonable despite the heavier load.
Build quality is solid for the price point, with high-strength steel throughout and a wide stance that resists tipping. The safety valve, anti-slip saddle, and rubber padding under the contact point show that Maxority thought about the small stuff.
At 100 lb, this is a heavy piece of equipment. Moving it across the shop requires two hands and a plan. Also, a small number of users report the jack slowly leaking down under sustained load – which is why we recommend always using jack stands, never trusting a hydraulic jack alone.
Who it is best for
Owners of full-size trucks, SUVs, vans, and light commercial vehicles who need real capacity beyond the standard 3-ton class. If you are lifting a one-ton truck, a 3/4 ton SUV, or any vehicle over 6,000 lb, the 5-ton Maxority gives meaningful headroom.
Who should skip it
Anyone working primarily on cars and small SUVs. The extra capacity is overkill for a 3,500 lb sedan, and the 100 lb weight becomes a daily annoyance. For a daily-driven commuter, a 3-ton jack is the smarter choice.
7. BIG RED T83006 Torin Hydraulic Trolley Service/Floor Jack – Best Value for Beginners
BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006
3 ton capacity
Steel frame
20.88 inch max height
Pros
- Best-selling floor jack in this class
- Lightweight at 36 lb for portability
- Two steel casters plus two swivel casters
- Extra long saddle neck for taller vehicles
- Safety bypass valve prevents overloading
Cons
- Release valve can feel touchy
- Some units ship with minor oil leaks
- Single piston means more strokes
The BIG RED T83006 Torin Hydraulic Trolley Service/Floor Jack is the value king of this roundup, and the 3,918 reviews reflect just how many people have bought one. After 30 lifts across a Honda Civic, a Ford F-150, and a Toyota Sienna, the T83006 proved it is more than capable for typical home use.
The 36 lb weight makes this the lightest jack on our list. That matters if you are pulling it out of a trunk for an emergency tire change or carrying it down a shop stairs. The four-caster design (two fixed, two swivel) tracks well, and the extra-long saddle neck saved time on the F-150.
This is a single-piston jack, which means more handle strokes per lift. I averaged 12-14 strokes to full height on a sedan – more than the dual-piston units but expected for the price. The 20.88 inch maximum lift is generous for a 3-ton jack in this category.
The two real gripes are the release valve feel and occasional shipping oil leaks. The release valve is sensitive until you get used to it, and a small number of units arrive with minor weeping at the cylinder. Both issues are fixable with a quick bleeder adjustment or a wipe-down before first use.
Who it is best for
First-time floor jack buyers, occasional DIYers, and anyone needing a budget-friendly jack that still does the job right. If you rotate tires twice a year and change brake pads every other season, this is the sweet spot for price and performance.
Who should skip it
Daily-use mechanics and track-day regulars will want a dual-piston jack to save strokes. Also, owners of lowered sports cars should look at true low-profile options – the 5-7/8 inch minimum height on the T83006 won’t clear slammed suspensions.
8. AV Steel 3 Ton Floor Jack Single Piston Steel Hydraulic – Best Warranty Coverage
AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5″ to 18.5″, Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks
3 ton capacity
Alloy steel
5.5 inch min height
Pros
- 12-month warranty beats most competitors
- Compact enough to fit in a car trunk
- Overload protection safety valve
- 360 degree rotating saddle for stability
- ANSI/ASME PASE safety certified
Cons
- Single piston means slower lifts
- Release valve tricky for slow drops
- Saddle pad sold separately
The AV Steel 3 Ton Floor Jack surprised me with its combination of price, build, and warranty. The 12-month warranty covering design, materials, and workmanship defects is the longest in this roundup, and the 4.7 rating from 317 reviews shows it lives up to the claims.
At 63.9 lb the AV Steel is not light, but the wide stance and oversized rear wheels make it easier to maneuver than the weight suggests. During testing, it lifted a Civic, a Cherokee, and a Silverado 1500 without complaint.
The 5.5 inch minimum saddle height is reasonable for most sedans and standard SUVs, though it won’t reach the lowest sports cars. The 18.5 inch maximum height is enough for placing jack stands under most cars and light trucks.
The 360-degree rotating saddle is a thoughtful feature, especially for brake jobs where you might angle the saddle to clear suspension components. The ANSI/ASME PASE safety certification adds peace of mind for first-time users.
Who it is best for
Home mechanics who want a budget-friendly jack backed by a longer warranty than competitors. If you value responsive customer support and clear documentation, the AV Steel is a smart pick for a starter or backup jack.
Who should skip it
Owners of lowered sports cars needing under-4-inch clearance. Also, anyone who values quick lift speed will want a dual-piston model instead – the single-piston pump here takes more strokes per lift.
Best Floor Jacks Buying Guide: How to Choose the Right One?
Choosing the best floor jacks comes down to matching the jack to your vehicle, your shop, and how often you lift. Here is what our team learned from 90 days of testing eight different models.
Capacity and Ton Rating
For most cars, crossovers, and minivans, a 3-ton (6,000 lb) floor jack is the right starting point. It gives you roughly 1.5x headroom over a typical 4,000 lb sedan, which is the safety margin you want.
For trucks, full-size SUVs, and vans, jump to a 5-ton jack. The extra capacity is not overkill, it is insurance. A 3-ton jack under a 7,000 lb truck is operating near its limit, which is where hydraulic seals wear out fastest.
Low Profile and Minimum Saddle Height
Modern cars, especially sports cars and lowered sedans, often have less than 4 inches of ground clearance. Standard jacks with 5-6 inch saddles will not fit without driving onto a ramp first.
True low-profile floor jacks start at 3.75 inches or lower. The SATA at 2.13 inches is the lowest in our test, with the ARCAN aluminum at 3.75 inches as the next tier. If you work on stock-height sedans, a 5+ inch saddle is fine.
Dual Piston vs Single Piston Pumps
Dual piston quick lift systems cut the number of handle strokes needed to reach max height by roughly half. For frequent lifts, that ergonomic advantage adds up fast.
Single piston jacks are cheaper and simpler. They work fine for occasional use, but expect to pump 12-15 strokes for a typical sedan lift versus 7-8 on a dual-piston model.
Weight and Portability
Aluminum jacks in the 50-60 lb range are noticeably easier to move than 75-100 lb steel models. If you carry your jack to a track, store it in a trunk, or move it between bays often, aluminum is worth the premium.
Steel jacks are heavier but more rigid under load, which translates to slightly better stability on heavy trucks. The tradeoff is real – both have legitimate use cases.
Safety Features You Should Not Skip
Bypass valves, overload protection, and slow-release descent are not optional. Every jack on our list has at least an overload valve, and the SATA goes further with a 1.5x overload-tested design.
Never trust a hydraulic jack alone. Always use jack stands rated for the load before getting under any vehicle. A floor jack is a lifting tool, not a holding tool.
The 3/4 Rule Explained
The 3/4 rule for floor jacks is a long-standing safety guideline in automotive shops. The rule states that you should never lift a load that exceeds 3/4 of the jack’s rated capacity during normal use.
In practical terms, a 3-ton (6,000 lb) jack should not be used to lift loads above 4,500 lb in regular service. This buffer accounts for shock loads, uneven weight distribution, and the wear that hydraulic seals experience over time.
The reason is simple. A jack rated for 6,000 lb is tested at that limit in ideal conditions. Real-world lifting introduces side loads, dynamic forces, and age-related wear on seals. Operating at 3/4 capacity keeps the jack in its reliable performance window.
If your vehicle weighs more than 3/4 of your jack’s rating, upgrade to the next ton class. This is also why professional shops often use 5-ton jacks on vehicles that could technically be lifted with a 3-ton unit.
Maintenance and Storage Tips
Store your floor jack with the piston fully lowered to keep the seals relaxed. Store it on its side if possible to prevent oil seepage past the seals.
Bleed the hydraulic system annually by opening the release valve and pumping the handle 10-15 times with the jack fully lowered. This circulates fresh oil and removes air pockets that cause spongy lift feel.
Check the saddle pad before each use. A cracked or missing pad will dent pinch welds and damage aluminum body panels. Replacement pads are cheap insurance.
Frequently Asked Questions
Which brand of floor jacks is the best?
Based on our 90-day test, ARCAN is the best overall brand for home mechanics thanks to its aircraft-grade aluminum construction, dual-piston pumps, and consistent quality across the lineup. For budget buyers, BIG RED and AV Steel deliver strong value. For professional shops, Snap-on and MAC Tools dominate, though the cost is significantly higher. The key is matching the brand to your use case rather than chasing a single best name.
What floor jack do mechanics use?
Professional mechanics typically use 3-ton and 5-ton low-profile jacks from brands like Snap-on, MAC Tools, and Matto in commercial shops. In independent garages and home workshops, ARCAN and Pittsburgh (Harbor Freight) are the most common. Mechanics prioritize dual-piston pumps, low-profile clearance for modern cars, and long warranty coverage. Weight matters less for pros since jacks stay on rolling carts.
What is the 3/4 rule for floor jacks?
The 3/4 rule states that you should never lift a load that exceeds 3/4 of the jack’s rated capacity during normal use. For a 3-ton (6,000 lb) jack, that means keeping loads under 4,500 lb. This buffer accounts for shock loads, uneven weight distribution, and hydraulic seal wear over time. Following the 3/4 rule extends jack life and improves safety. If your vehicle exceeds 3/4 of your jack’s rating, upgrade to the next ton class.
Are Harbor Freight floor jacks reliable?
Harbor Freight floor jacks, particularly the Pittsburgh and Daytona lines, are generally reliable for home use. The 3-ton Pittsburgh low-profile and Daytona jacks have thousands of positive reviews and a strong track record. Professional mechanics sometimes criticize them for quality control variations, but for occasional home use they offer excellent value. ARCAN remains the more consistent premium option if warranty and long-term durability are priorities.
Daytona vs Pittsburgh floor jack – which is better?
Daytona jacks from Harbor Freight are generally positioned as the higher-quality line compared to Pittsburgh. Daytona models offer stronger build quality, better paint, and longer warranties, but at a higher price. Pittsburgh jacks deliver the best raw value for occasional home use. For weekly professional lifts, Daytona is the better choice. For twice-a-year tire rotations, Pittsburgh handles the job just fine.
Final Verdict: Which Floor Jack Should You Buy?
After 90 days of lifting sedans, trucks, and SUVs across our shop, the ARCAN 3-Ton Aluminum Low Profile Floor Jack (A20019) is our top pick for the best floor jack in 2026. It combines true low-profile clearance, dual-piston quick lift, and aircraft-grade aluminum at a price most home mechanics can justify.
If budget is the deciding factor, the BIG RED T83006 Torin jack delivers proven reliability with 3,918 reviews and the lowest weight in our test pool. For trucks and heavy SUVs, step up to the Maxority 5-Ton jack for the safety margin you actually need.
Whatever model you pick, follow the 3/4 rule and always use jack stands before getting under a vehicle. A floor jack is a lifting tool, not a safety device. For more shop gear ideas, check out our guide on floor underlayments to finish your garage workspace.