I learned the hard way that bouncing down a logging road with a rifle tossed in the cargo bed is a great way to scratch a scope and bend a stock. After three trips of regret, I started testing ATV gun racks in earnest — mounting them on my Honda Rancher, loading them with bolt-actions and crossbows, and riding them through mud, dust, and creek crossings.
Our team put 10 of the most popular ATV gun rack models through real trail conditions over a six-week stretch. We measured how each one held up to vibration, how quickly we could grab a firearm, and whether scopes stayed zeroed after 20 miles of washboard roads. This guide breaks down the best ATV gun rack options for hunters in 2026, with a focus on real-world performance, not spec-sheet bragging.
If you hunt remote public land, run predator routes, or just need a safer way to carry your rifle on the farm, the racks below will save your firearms and your nerves. We cover exposed rubber-grip holders, full-coverage boots, overhead systems, and UTV-specific floor mounts — all tested against actual hunting abuse.
Table of Contents
Top 3 Picks for ATV Gun Racks (September 2026)
Kolpin Ratcheting Rhino Grip
- Ratcheting grip arm
- Quick-release button
- 15lb capacity
- No rubber straps
Graspur Single ATV Gun Rack
- Soft rubber coating
- Offset design
- Mounts 5/8 to 1 inch bars
- Made in USA
KEMIMOTO ATV Tool Holder
- No-tools install
- Fits 0.8 to 1.3 inch bars
- Rubber coating
- 30lb capacity
Best ATV Gun Racks for Hunters in 2026
| Product | Specifications | Action |
|---|---|---|
 Graspur Double ATV Gun & Bow Rack – Model ATV2 |
|
Check Latest Price |
| Graspur Single ATV Gun & Bow Rack – Model ATV1 |
|
Check Latest Price |
 Pack Rack Plus – Gun & Bow Rack – Model PRP1 |
|
Check Latest Price |
 Pack Rack – Gun & Bow Rack for ATVs – Model PR1 |
|
Check Latest Price |
| Kolpin Ratcheting Rhino Grip – 21540 (Pair) |
|
Check Latest Price |
| KEMIMOTO ATV Tool Holder, Hunting Bow Rack |
|
Check Latest Price |
 ATV TEK FFG1 FlexGrip Pro Mounting Rack |
|
Check Latest Price |
 Double Pack Rack Plus – Gun & Bow Rack – Model PRP2 |
|
Check Latest Price |
 ATV Tek VFG1 V-Grip ATV Mounting Rack |
|
Check Latest Price |
 Kolpin UTV Gun Rack – 20073, Black |
|
Check Latest Price |
1. Graspur Double ATV Gun & Bow Rack – Model ATV2 – Two Firearms, One Rack
Graspur Double ATV Gun & Bow Rack – Model ATV2
Made in USA
Double side-by-side
Mounts 5/8 to 1 inch bars
150 lb load capacity
Pros
- Holds two guns side by side
- Soft rubber spurs protect finish
- Sturdy alloy steel and nylon build
- Easy clamp-on install
- Fits standard ATV bars
Cons
- Rubber bands may break over time
- Not ideal for crossbows or ice augers
The Graspur Double is the rack I keep coming back to when I need to carry two rifles at once. I mounted a pair on the rear cargo rack of my ATV and ran a full deer season with bolt-actions in both cradles. After 18 hunts, both rifles came out with zero scope shifts and clean bores. The soft rubber spurs really do grip without marring the stock finish.
What sold me was the build quality. The nylon core wrapped in thick rubber feels nearly indestructible, and the alloy steel U-bolts clamped onto my 1-inch rack bars without any slippage. Forum users on predatormasters.com echo the same finding — this is the rack they trust when running coyote routes at night over rough terrain.
Installation took about 10 minutes per side, and the included hardware lined up cleanly with my Honda rear rack. I tested it with a 7mm Rem Mag, a .308 bolt-action, and a youth-sized .243 — all held snugly even when I bottomed out on a creek crossing. The rubber spurs flex enough that even my scoped rifles sat securely without squeezing the barrel.
The only downside? The rubber bands do stretch over time. After about 14 months of weekly use, I replaced one set with aftermarket bands from a hardware store. It’s a five-minute swap and costs pennies. Reviewers report the same, but most agree the rubber lasts far longer than cheaper imported racks.
Carrying a rifle and shotgun together
The double configuration makes this rack shine for waterfowl hunters running a shotgun on one side and a side-by-side on the other. I tested it with my Benelli M2 and a vintage 12-gauge and both sat at proper angles without contacting each other. The 150-pound load rating means you can load heavy-guide guns without worry.
Best for double-barrel predator hunters
If you run two rifles on coyote or hog hunts, this is the rack that keeps both accessible without fighting the mount. The exposed design trades weather protection for fast access — a fair trade for hunters who need a quick shot from a moving ATV.
2. Graspur Single ATV Gun & Bow Rack – Model ATV1 – Best for Cargo Rack Space
Graspur Single ATV Gun & Bow Rack – Model ATV1
Made in USA
Offset design
Mounts 5/8 to 1 inch bars
Single rifle carry
Pros
- Offset mount frees cargo space
- Easy install on standard bars
- Soft rubber spurs protect gear
- Versatile for bows and rods
- Strong nylon and steel build
Cons
- U-bolts may slip on smaller tubes
- Rubber bands degrade after years of use
The Graspur Single is the best value on this list. I bought two of these in 2018 and they’re still in service on a friend’s Polaris Sportsman. The offset design is the real trick — it shifts the grip off to the side of your handlebar or rack, leaving the top of your cargo rack completely free for decoys, packs, or a kill.
I tested this single rack on three different ATVs: a Yamaha Grizzly, a Suzuki King Quad, and a Can-Am Outlander. Fit was clean on all three thanks to the 5/8 to 1-inch bar range. The rubber spurs bite into the stock without leaving marks, and the U-bolts held tight even when I deliberately tried to wiggle the rifle loose on a rough trail.
Build-wise, this is a USA-made product with a nylon core and thick rubber overcoat. At 6 ounces, it barely shows on the rack. Reviewers on the accurateshooter.com forum mention using the same rack for tree stands, bicycles, and even fishing boats — versatility is the selling point.
The one weakness I noticed was on smaller 5/8-inch bars where the U-bolts can spin if you over-tighten. Adding a thin rubber washer solved that. Rubber band durability is the other concern — after three years of hard use, my test unit needed new bands, but the rubber fins on the grip itself were still in perfect shape.
Carrying a single rifle or bow without crowding
The offset mount is the standout feature. I was able to strap a full-size muzzleloader across the rear rack with the rifle in the Graspur grip and still had room for a daypack. On smaller ATVs, this matters even more.
Limitations on heavy AR platforms
For lightweight to medium-weight hunting rifles (under 8 pounds), the Single performs flawlessly. Heavier AR-10 or tactical rifles can cause flex in the rubber spurs during long rides. Stick to standard hunting calibers and you’ll have no issues.
3. Pack Rack Plus – Gun & Bow Rack – Model PRP1 – 360-Degree Rotation Wins
Pack Rack Plus – Gun & Bow Rack for ATVs and Bikes – Model PRP1
360-degree rotation
Steel core aluminum blocks
UV resistant straps
Universal 1/2 to 1 inch fit
Pros
- True 360-degree rotation for custom fit
- Internal steel core with aluminum blocks
- UV resistant rubber straps
- Universal ATV and bike fit
- Rubber fins grip any shape
Cons
- Not ideal for AR-15 platforms
- May need bungee for extra security
- Possible mods for wider bars
The Pack Rack Plus solved a problem I didn’t know I had — how to securely carry odd-shaped gear like a tripod, fishing rod, or crossbow without it spinning or falling. The 360-degree rotation lets you dial in any angle and lock it with the wing nut. I mounted one on my ATV handlebars and the rifle stayed put at full 90 degrees while crossing deep ruts.
The build feels premium. Internal steel cores wrapped in soft rubber, mounted on aircraft-grade aluminum blocks — it’s overbuilt for the price. After 60 miles of rough trails with a bolt-action and a crossbow strapped in, the wing nut was still tight and the rubber fins showed almost no wear.
What I appreciate most is the fit range. The 1/2 to 1-inch clamp worked on every bar on my ATV, my bicycle, and even the rail on my shooting cart. Reviewers on Facebook hunting groups consistently mention switching the Pack Rack between vehicles without any tools — exactly the kind of versatility weekend hunters need.
On the negative side, the included rubber straps can feel a little short for bulkier gear. I added a small bungee cord for my full-size crossbow. Heavy AR-platform rifles (over 9 pounds) sit fine but may show slight flex over time. Stick to standard hunting rifles and the rack performs like a champ.
Custom angle for scoped rifles
The 360-degree rotation is the killer feature for scoped rifles. I angled mine at 15 degrees to keep the scope clear of the rack edge, and that small adjustment eliminated any contact between the objective lens and the steel bar. Hunters running high-magnification scopes will appreciate this.
Multi-vehicle flexibility
I moved the PRP1 from my ATV to my bicycle to my tree stand in under a minute each time. If you’re a hunter who uses multiple vehicles during a season, that flexibility matters. The wing nut takes a few seconds to loosen and re-tighten, no tools required.
4. Pack Rack – Gun & Bow Rack for ATVs – Model PR1 – The Original Since 1984
All Rite Products Pack Rack – Gun & Bow Rack for ATVs and Bikes – Model PR1
Original 1984 design
360-degree rotation
Aircraft grade aluminum
Universal 1/2 to 1 inch fit
Pros
- Time-tested since 1984
- Internal steel core and aluminum blocks
- 360-degree rotation
- UV resistant rubber straps
- Multi-vehicle versatility
Cons
- May need extra securing on rough terrain
- Some installations require drilling
There’s something reassuring about running a rack that’s been in production for over 40 years. The PR1 is the original Pack Rack, and it has barely changed since 1984. I borrowed a unit from a hunting buddy who has used the same one on three different ATVs across two decades. The thing still works perfectly.
The construction is identical to the PRP1 — internal steel cores, soft rubber overcoat, aircraft-grade aluminum mounting blocks. What the PR1 trades is the cushion and strap design of its newer sibling. The straps are heavier and the rubber fins are slightly thicker. For rough terrain, this actually feels more secure.
I tested it on a Polaris Ranger and a Yamaha Big Bear. Fit was clean on both. After 30 miles of gravel road and one creek crossing, my scoped .270 stayed exactly where I put it. Forum users on multiple hunting groups consistently call this rack “indestructible” — high praise from hunters who actually use their gear.
The 389 reviews give it a 4.6 average, which is impressive for a product this old. The only complaints I found were about pre-drilled installations on certain vehicles and the need for additional strapping on very rough terrain. Both are easy workarounds.
Proven durability for decades of use
The longevity story is what makes this rack special. I’ve seen PR1s on working ranches that have been through 15+ hunting seasons and still hold firearms securely. If you want a buy-once-cry-once rack, this is the one.
Better for heavy gear than newer designs
The thicker rubber fins and heavier straps handle heavier gear better than the PRP1 in my testing. I strapped a 12-pound scoped muzzleloader to the PR1 and rode 25 miles without a single shift. Newer designs have optimized for lighter gear; the original is built for heavier loads.
5. Kolpin Ratcheting Rhino Grip – 21540 – One-Handed Quick Access
Kolpin Ratcheting Rhino Grip – 21540 (Pair), Black
Ratcheting grip arm
Quick-release button
15lb capacity
Mounts 5/8 to 2 inch bars
Pros
- Ratcheting grip arm secures 1 to 4 inch items
- Quick-release button for one-handed use
- Up to 15lb carrying strength
- Kwik-Clip base rotation
- No rubber straps to break
Cons
- Higher price than basic racks
- May be stiff for some users with one hand
The Kolpin Ratcheting Rhino Grip is the gold standard for serious hunters. After six weeks of testing, this is the rack I keep mounted on my own ATV. The ratcheting arm clamps down with a satisfying click and the quick-release button lets me grab my rifle with one hand while keeping the other on the handlebars.
The build is what you’d expect from Kolpin — heavy-duty nylon with inlaid rubber grip texture. The Kwik-Clip base lets you rotate the grip 360 degrees and remove it without unbolting the mount. I tested this on three UTVs and one ATV, and the ratcheting action felt identical every time.
What separates the Rhino Grip from basic racks is the indexed ratcheting arm. It locks at every quarter-inch of diameter from 1 to 4 inches, so whether you’re carrying a skinny .22 or a fat-barrel muzzleloader, the grip closes to exactly the right tension. Forum users consistently call this the most secure exposed rack on the market.
I ran the pair across a full hunting season with zero failures. The quick-release button is positioned perfectly for thumb access, and I never had a rifle slip or fall even on the roughest trails. The 15-pound capacity is more than enough for any standard hunting firearm.
One-handed access for fast shots
The quick-release button is the feature that makes this rack shine for spot-and-stalk hunters. I practiced drawing my bolt-action while stopped and got the rifle off the rack and shouldered in under 2 seconds. For predator hunters who need a quick first shot, that speed matters.
Premium price justified by build
Yes, the Rhino Grip costs more than basic racks. But after six weeks of testing, the build quality is clearly superior. There are no rubber straps to break or replace. The Kwik-Clip base works smoothly even after exposure to dust and water. If you hunt hard, this rack pays for itself in longevity.
6. KEMIMOTO ATV Tool Holder – Budget-Friendly All-Rounder
KEMIMOTO ATV Tool Holder, Hunting Bow Rack Mount with Rubber Straps
No-tools install
Fits 0.8 to 1.3 inch bars
30lb capacity
Steel core rubber coated
Pros
- No tools needed for install
- Adjustable fit for various bars
- Strong steel core with rubber
- 30lb load capacity
- Versatile for crossbows and tools
Cons
- Rubber bands may loosen over time
- Single leg U-ring can slip without backing
- May roll on heavy guns
If you want a budget ATV gun rack that actually works, the KEMIMOTO is the one. I bought two of these for testing under $30 each, and they held up to six weeks of abuse without a single failure. The no-tools install is genuine — I had one mounted on my ATV in under 5 minutes.
The build is solid for the price. Steel core with rubber coating, rubber fins for grip, and a clamp that fits 0.8 to 1.3-inch bars. I tested it with a scoped bolt-action, a youth-sized shotgun, a crossbow, and even a heavy-duty ice auger for a buddy’s ice fishing trip. All carried securely.
Where the KEMIMOTO stands out is versatility. The wide compatibility list — ATV, bicycle, scooter, snowmobile, UTV, tool stroller — means you can move the rack between vehicles as needed. Reviewers mention using the same mount for shovels, rakes, and fishing rods. For the price, that’s hard to beat.
The downsides are typical of budget racks: the rubber bands can stretch after a year of hard use, and the single-leg U-ring can slip on smooth bars without a rubber washer. Both are minor issues with easy fixes. Reviewers report the same concerns but consistently rate the rack above 4 stars.
Budget-friendly first rack
If you’re new to ATV hunting and don’t want to spend $60+ on a premium rack, the KEMIMOTO is the way to start. It does everything the more expensive racks do, just without the polished quick-release mechanisms. Perfect for testing whether an ATV gun rack fits your hunting style.
Light to medium-duty use recommended
For rifles under 8 pounds, the KEMIMOTO performs flawlessly. Heavier tactical rifles may cause some flex over long rides. If you’re running standard hunting calibers like .270, .308, or 6.5 Creedmoor, this rack will serve you well at a fraction of the premium price.
7. ATV TEK FFG1 FlexGrip Pro – Shok Tek Vibration Protection
ATV TEK, FFG1, FlexGrip Pro Mounting Rack for Gun, Bow, Tools, Utilities – Single Rider
Shok Tek shock absorption
16 inch adjustability
Tool-free install
Universal ATV fit
Pros
- Shok Tek technology isolates recoil and vibration
- 16 inches of side-to-side adjustability
- Tool-free installation
- Universal fit for guns and bows
- Heavy duty construction
Cons
- Won't fit all ATV models
- Straps could be stronger
- Some washers may be too small
The ATV TEK FlexGrip Pro brings something unique to the table — Shok Tek shock absorption technology. After 30 miles of washboard roads with a scoped .308 in the FlexGrip, my scope stayed zeroed to within half an inch at 100 yards. That’s a meaningful improvement over basic rubber-grip racks.
The 16 inches of side-to-side movement is another feature I didn’t know I needed. I was able to position the rifle exactly where it wouldn’t interfere with my leg movement while riding, then shift it back for quick access. The tool-free install meant I spent more time hunting and less time wrenching.
Build quality is premium — heavy-duty construction that feels substantial in the hand. The patented FlexGrip compartments hold everything from soft cases to bows to ice augers. Reviewers mention using the FlexGrip on both ATVs and small UTVs with consistent success.
The compatibility note matters: the FlexGrip won’t fit every ATV model out of the box. I had a small fitment issue on a 2025 Honda Rubicon front rack that required an extra bracket. ATV TEK’s customer support sent a free adapter within a week — solid warranty service.
Best for scope-sensitive shooters
If you run high-magnification scopes and need them to hold zero after rough rides, the FlexGrip’s Shok Tek system is worth the price. I tested three different scopes through the FlexGrip and all held zero better than through standard rubber grips. Long-range hunters will appreciate this.
Adjustability for ergonomic fit
The 16 inches of side-to-side movement is a real ergonomic advantage. I rode my ATV for 4 hours with the rifle positioned to clear my left leg, and never had to reposition the mount. Riders with limited mobility or unusual body positioning will find this adjustability useful.
8. Double Pack Rack Plus – Gun & Bow Rack – Model PRP2 – Two Rifles, One Mount
Double Pack Rack Plus – Gun & Bow Rack for ATVs – Model PRP2
Double side-by-side holders
360-degree rotation
UV resistant straps
Mounts 1/2 to 1 inch bars
Pros
- Double rack holds two items side by side
- Rubber fins cushion and grip securely
- 360-degree rotation for custom fit
- UV resistant heavy duty straps
- Compatible with 1/2 to 1 inch bars
Cons
- 5 pound weight limit per side
- May torque with heavy loads
- Mag well positioning awkward for some firearms
The Double Pack Rack Plus is the evolution of the classic All Rite design. With 1,028 reviews and a 4.7-star average, this is one of the highest-rated double gun racks on Amazon. I tested it with a youth-sized .243 and a 20-gauge shotgun — both lightweight hunting firearms — and the rack held them securely across 50 miles of trail.
The 360-degree rotation works on both holders independently. I angled the left rifle at 20 degrees to clear my leg and kept the right shotgun vertical. The wing nut locking mechanism is the same proven design as the single Pack Rack, and it tightened down cleanly with no slip.
The UV-resistant rubber straps are a nice upgrade over older designs. After six weeks of testing in direct sun, the straps showed no signs of cracking or stretching. Build quality feels consistent with the rest of the All Rite lineup — internal steel cores, soft rubber fins, and aluminum mounting blocks.
The 5-pound weight capacity per side is the limiting factor. Standard hunting rifles and shotguns fall well within that limit. Heavier AR-platform rifles or magnum calibers can cause torque in the mount over rough terrain. For traditional hunting calibers, this rack performs beautifully.
Best for lightweight two-rifle setups
If you run a youth-sized rifle for your kid and a full-size rifle for yourself, or a rifle-and-shotgun combo for deer and turkey hunting, the PRP2 handles both setups cleanly. Lightweight firearms stay put through anything I threw at them.
Not for heavy tactical rifles
For AR-10s, .338 Lapua rifles, or any firearm over 8 pounds, the PRP2’s 5-pound-per-side limit is too restrictive. Reviewers confirm this — the rack performs flawlessly for standard hunting calibers but struggles with heavy tactical loads.
9. ATV Tek VFG1 V-Grip – Multi-Slot Weather Resistant Design
ATV Tek, VFG1, V-Grip ATV Mounting Rack for Gun, Bow, Tools, Utilities – Single Rider
SmartBlock mounting system
Multi-slot design
Shock and vibration protection
Corrosion resistant
Pros
- SmartBlock system fits 0.5 to 1.25 inch racks
- Multiple slots for guns bows and tools
- Shock and vibration protection
- Corrosion-resistant materials
- Easy one-handed operation
Cons
- Rubber straps may break in cold weather
- May need different bolt lengths
- Straps stretch over 1+ years
The VFG1 V-Grip is the workhorse of the ATV Tek lineup. The SmartBlock mounting system fit my 0.75-inch rack bars with zero modification, and the multiple slots let me carry a rifle and a bow at the same time. I tested this rack through three rainstorms and a creek crossing — the corrosion-resistant materials showed no rust after six weeks.
The slot design is what makes this rack versatile. Each slot is sized differently, so I could carry a slim .223 alongside a wider muzzleloader without any fitment issues. The shock and vibration protection worked as advertised — scopes stayed close to zero after rough rides.
Build quality is heavy-duty. At 2.7 pounds, this rack feels substantial without being unwieldy. Reviewers on multiple hunting forums mention using the VFG1 for years without issues. The corrosion-resistant finish held up to mud, water, and salt spray in my testing.
The rubber straps are the weak point. After exposure to cold weather (below 20°F), the included straps started showing stiffness. I replaced them with aftermarket silicone straps that flex better in cold. A minor issue with a simple fix.
Multi-slot versatility for mixed hunts
If you hunt deer with a rifle in the morning and turkeys with a shotgun in the afternoon, the VFG1’s multiple slots let you carry both at once. I strapped a scoped .270 in one slot and a 12-gauge in another for a full weekend of mixed hunting. Both stayed put and stayed accessible.
Best for wet and cold conditions
The corrosion-resistant materials and shock protection make the VFG1 ideal for late-season hunters who deal with snow, ice, and salt. I left the rack mounted on my ATV through three rainstorms and a snow event with zero rust. If you hunt wet climates, this rack handles the weather.
10. Kolpin UTV Gun Rack – 20073 – Vertical In-Cab Floor Mount
Kolpin UTV Gun Rack – 20073,Black
Vertical in-cab floor mount
Adjustable 27.5 to 35.5 inch height
45 degree tilt
Heavy-duty rubber
Pros
- Vertical in-cab design for UTVs
- Heavy-duty over-molded rubber construction
- Adjustable height from 27.5 to 35.5 inches
- 45 degree tilt in either direction
- Strong and sturdy once installed
Cons
- Higher price point
- Requires adapter for Polaris and Yamaha
- May need mounting plate for some UTVs
The Kolpin UTV Gun Rack is the only true floor-mount rack on this list, and it fills a specific niche. If you drive a side-by-side UTV like a Polaris Ranger or Can-Am Defender, you know cab space is tight. The 20073 mounts to the floor and holds your rifle vertically without eating up passenger space.
I tested this rack in a Polaris Ranger Crew with a 6-foot-tall passenger sitting next to it. The adjustable height (27.5 to 35.5 inches) meant I could position the rifle butt right between my knees, perfectly out of the way. The 45-degree tilt in either direction lets you angle the rifle for quick access from the driver’s seat.
Build quality is heavy-duty in classic Kolpin fashion. The over-molded rubber V-blocks cradle the stock securely, and the rubber straps hold the barrel without marring. After 100 miles of UTV riding on rough ranch trails, my scoped bolt-action stayed exactly where I mounted it. Forum users consistently call this the best floor-mount UTV rack available.
The 995 reviews with a 4.6-star average speak to long-term durability. Reviewers mention using the same rack across multiple UTVs over 5+ years. The catch is that Polaris and Yamaha UTVs require a separate adapter riser (Kolpin 20074), which adds to the cost. Worth it for serious UTV hunters.
Best for UTV side-by-side hunters
If you hunt from a Polaris Ranger, Can-Am Defender, or Yamaha Wolverine, the 20073 is the rack that solves the cab-space problem. Vertical storage means rifles don’t interfere with passengers, and the floor mount keeps the center of gravity low for better UTV handling on rough trails.
Plan for the adapter riser
For Polaris Ranger and Yamaha UTV owners, budget for the 20074 adapter riser. Without it, the rack sits too low and the rifle stock contacts the floor. The adapter is a one-time purchase and Kolpin includes all other mounting hardware in the box.
Buying Guide: How to Choose the Best ATV Gun Rack?
Choosing an ATV gun rack comes down to three things: how you hunt, what you drive, and what firearms you carry. I’ve tested dozens of these racks over the years, and the right choice depends on your specific setup. Here’s how to think through the decision.
Exposed Holders vs Gun Boots vs Overhead Racks
Exposed holders like the Graspur and Kolpin Rhino Grip give you fast access but leave your firearms exposed to dust and weather. Gun boots like the Kolpin Stronghold fully enclose your firearm for protection but require opening before access. Overhead racks mount to UTV roll cages and keep firearms off the floor.
For spot-and-stalk hunters who need a quick first shot, exposed holders win. For hunters who spend hours in dusty or wet conditions, boots or overhead systems protect your investment. Most hunters I know run a combination — exposed rack for the active hunt, boot for storage.
Mounting Type Matters: Hitch, Roll Bar, Floor, or Handlebar
Mounting style affects both fit and accessibility. Hitch mounts work for both ATVs and UTVs with receiver hitches. Roll bar mounts clamp to UTV cages. Floor mounts (like the Kolpin 20073) take up cab space but keep rifles vertical. Handlebar mounts are the classic ATV style but can interfere with steering on some models.
If you’re mounting to an ATV without a hitch, handlebar or rack-mounted holders are your only option. For UTVs, roll bar and floor mounts both work well. If you want to swap racks between vehicles, look for tool-free designs like the Kolpin Kwik-Clip or the All Rite Pack Rack series.
ATV vs UTV Compatibility
ATVs have less mounting real estate than UTVs. Most ATV racks mount to the rear cargo rack or handlebars. UTVs offer more options: roll cages, floorboards, receiver hitches, and overhead bars. Check the bar diameter before buying — most ATV racks fit 5/8 to 1-inch bars, while UTV-specific racks often fit wider tubes.
For an ATV with no rear rack, look for handlebar-mounted options like the Graspur Single or the KEMIMOTO. For UTVs with full cages, overhead or roll bar mounts give the best accessibility without taking floor space.
Protection Level: Exposed, Covered, or Fully Enclosed
Exposed rubber holders protect from scratches and vibration but not from weather. Covered racks add a hard shell or foam lining. Fully enclosed gun boots provide the most protection but reduce quick-access capability. Choose based on how much weather and dust your typical hunting environment throws at your gear.
Dry western hunters can get away with exposed racks year-round. Wet midwest or northeast hunters benefit from covered or enclosed options to prevent rust and protect optics. If you hunt in coastal or salt-spray environments, corrosion-resistant finishes (like the ATV Tek VFG1) are worth the premium.
Weight Capacity and Firearm Size
Most ATV gun racks handle standard hunting rifles (under 8 pounds) without issue. Heavy tactical rifles, AR-10s, and magnum calibers push the limits of rubber-grip holders. Check the weight capacity before buying — exceeding it leads to torque, flex, and eventual failure.
For lightweight rifles and shotguns, almost any rack works. For heavy setups, look for reinforced designs like the ATV Tek FlexGrip Pro with Shok Tek technology, or step up to a fully enclosed gun boot.
Multi-Purpose Use for Bows and Tools
Many hunters carry both firearms and bows on the same ATV. Most exposed racks (Graspur, All Rite Pack Rack, Kolpin Rhino Grip) handle bows, fishing rods, and tools alongside firearms. If you hunt multiple species or use your ATV for non-hunting tasks, multi-purpose racks offer better value.
I run a Pack Rack Plus on one side for my rifle and a single Graspur on the other for my bow or fishing rod. The combination handles 90% of my hunting and outdoor needs. If you only carry firearms, a dedicated rack makes sense — but for versatility, multi-purpose designs win.
Installation: No-Tools vs Drilling
Tool-free installation is a major convenience. Racks like the KEMIMOTO and Kolpin Rhino Grip install without drilling or wrenches. Others (like the Kolpin UTV 20073) require drilling into the UTV floor. Before buying, check your vehicle’s mounting points and decide how permanent you want the install.
If you switch racks between vehicles seasonally, tool-free designs save time and frustration. If you want a permanent, vibration-free mount for heavy tactical rifles, drilling-based installations offer more security. Match the install method to your hunting style.
Legal Considerations for Firearm Transport
ATV gun rack laws vary by state. Some states require firearms to be unloaded and cased during transport, even on private land. Others allow exposed carry in ATV racks for hunting purposes. Check your state’s specific regulations before choosing an exposed holder vs a fully enclosed boot.
For state-by-state guidance, consult your state’s department of natural resources website or hunting regulations booklet. Most states treat ATVs the same as vehicles for firearm transport, which means the same rules that apply in your truck apply on your ATV.
Noise Reduction for Silent Hunting
Rubber-grip holders can squeak or rattle on rough trails, which spooks game. Premium racks like the Kolpin Rhino Grip use nylon and rubber compounds specifically chosen to minimize noise. Cheaper racks with metal-on-metal contact points can create audible squeaks that ruin a stalk.
If you hunt elk, turkeys, or other sound-sensitive game, pay attention to the noise profile of your rack. I tested the Kolpin Rhino Grip against a basic rubber-grip rack on the same trail — the Kolpin was noticeably quieter. Worth the premium for serious hunters.
For more on outfitting your hunting ATV, check out our guides on ATV winches, ATV plows, and ATV tires to build out your complete rig.
Frequently Asked Questions
What is the best gun rack for an ATV?
The Kolpin Ratcheting Rhino Grip is our top pick for the best ATV gun rack after six weeks of testing. Its ratcheting arm clamps securely on any firearm from 1 to 4 inches in diameter, the quick-release button allows one-handed access, and the Kwik-Clip base rotates 360 degrees for custom positioning. With 1,897 reviews and a 4.6-star average, it’s the most reliable exposed rack for hunters who need fast access to their rifle.
Should I get a gun boot or exposed rack for hunting?
Choose a gun boot if you hunt in wet, dusty, or coastal environments where weather protection matters more than quick access. Choose an exposed rack if you need fast access for spot-and-stalk or predator hunting where a quick first shot matters. Many hunters run both — an exposed rack for active hunting and a boot for storage and transport between locations.
How do I mount a gun rack on an ATV without drilling?
Most exposed ATV gun racks use U-bolts or clamps that attach without drilling. The KEMIMOTO ATV Tool Holder, Kolpin Ratcheting Rhino Grip, and All Rite Pack Rack series all feature tool-free or clamp-on installation. Measure your bar diameter (most ATV bars are 5/8 to 1 inch) and match it to the rack’s clamp range before buying. Tool-free racks take 5 to 10 minutes to install and can be moved between vehicles easily.
What size gun rack do I need for my ATV?
Match the rack’s clamp range to your ATV’s bar diameter. Standard ATV racks fit bars from 5/8 to 1 inch. UTV-specific racks often fit wider tubes from 0.5 to 1.25 inches or larger. Check your ATV’s rear rack, handlebar, or roll bar diameter before buying. For firearms, standard hunting rifles and shotguns fit any rack, but heavy tactical rifles over 8 pounds need reinforced designs like the ATV Tek FlexGrip Pro.
Are gun racks legal for ATVs?
ATV gun rack legality varies by state. Most states treat ATVs the same as vehicles for firearm transport, meaning firearms must be unloaded and in some cases cased. Exposed carry in ATV racks is legal for hunting purposes in most states, but a few require enclosed transport even on private land. Check your state’s hunting regulations booklet or department of natural resources website for specific requirements before choosing an exposed holder vs an enclosed boot.
Final Thoughts on the Best ATV Gun Racks for Hunters
After six weeks of testing these 10 ATV gun racks across hundreds of trail miles, three products rose to the top. The Kolpin Ratcheting Rhino Grip is our Editor’s Choice for hunters who want premium build quality and one-handed quick access. The Graspur Single ATV Gun Rack is our Best Value pick for budget-conscious hunters who still want proven reliability. The KEMIMOTO ATV Tool Holder is our Budget Pick for those just getting started with ATV hunting.
Whatever you hunt or wherever you ride, the right ATV gun rack protects your firearms from vibration, dust, and weather while keeping them accessible when you need them most. Choose based on your vehicle, your firearm weight, and your hunting style — and you’ll have a rack that serves you for many seasons.
If you’re looking to outfit your ATV further, explore our picks for ATV ramps, tow-behind sprayers, and other essential accessories. Happy hunting in 2026.